Uni-ib board

Uni-ib board

The Unitex Uni-IB Board System, to equate to the Unitex Uni-Base Board System once installed, is to be first pre-coated with Unitex Polymer Render (with added 5% cement) which is applied with a Notch Trowel to a minimum depth of 3mm, and embedded Unitex Uni-Mesh IM. This is to achieve the Unitex Uni-Base Board which is then followed with all the system requirements to achieve the Unitex Uni-Base Board System (using the relevant Uni-Unitex Base Board System manual) for warranty (refer to Technical Manual for installation).