Floors
The Hebel PowerFloor+ flooring system is a loadbearing reinforced flooring system that can span up to 5.85 metres and provides a solid, fully engineered cross-braced floor for residential and commercial construction. Lightweight, yet strong, and offering enhanced insulation, this system can be laid in place without formwork or support and is trafficable immediately following installation. The interlocking of panels with grout creates a full fire seal between panels, and combined with Hebel’s unique fire resistant properties, the PowerFloor+ system can achieve FRL’s of up to 3 hours without relying on ceiling systems. Once finished, the floor provides a solid base for a range of floor coverings.
| System code | System Application | FRL | Acoustic rating | Thermal (r) values | Floor thickness (mm) |
|---|---|---|---|---|---|
| System code HEB 2150 |
label PowerFloor+ system on steel frame |
FRL -/180/180 (for 200mm or 250mm thick panels from below only) |
Acoustic rating Rw+Ctr = 50dB (as a built up system only. Contact CSR Hebel for further details). |
Thermal (r) values R0.92 (150mm thick panel only at dry density) to R1.54 (250mm thick panel only at dry density) |
Floor thickness (mm) 150 – 250mm |
| System code HEB 2151 |
label PowerFloor+ system on masonry or concrete walls |
FRL -/180/180 (for 200mm or 250mm thick panels from below only) |
Acoustic rating Rw+Ctr = 50dB (as a built up sysem only. Contact CSR Hebel for further details). |
Thermal (r) values R0.92 (150mm thick panel only at dry density) to R1.54 (250mm thick panel only at dry density) |
Floor thickness (mm) 150 – 250mm |